The diaphragm pressure regulator U13 is One of the most successful pressure regulators ever built for industrial gas supply, proven for decades, often copied, but never reached. Using this model, you can get flow rates up to 500 m³/h with high control accuracy.
Our U13 regulators are widely used in APPLICATIONS, where gas is required at higher flowrates and pressure. U13 gives the desired flow characteristics with efficient utilisation of the cylinder / pallet / tank contents, enabling cost savings and trouble-free working. This pressure regulator can be used for all non-corrosive industrial gases like Oxygen, LPG, Argon, ACM, Hydrogen, Nitrogen, SF6 etc., to name a few.
Selecting the right U13 for the required application has been made a whole lot easier! Just select the required pressure range and the required characteristic of the pressure regulator and you will have the right pressure regulator for your application:
for precise regulation
M: “Medium” for optimum regulation and flow
F: “Flow” for
high flow rates
• Diaphragm pressure regulator | • Single stage with high control accuracy
• Central filter in the pressure regulator | • Regulator manufactured in accordance with EN ISO 7291
• Regulator with integrated relief valve | • Fittings & connector available on demand.
INLET PRESSURE P1 Max.- 40 /200 /300 Bar
OUTLET PRESSURE P2 - @P1 = 40 Bar:
@ P1 = 300 Bar:
BODY: Brass VALVE SEAT: PA Temperature Range -30°C To +60°C
FLOW RATE Q Max. 500 M3/H
Max. 1,5 to 4 Bar
Max. 6 to 351) Bar 1) For O2 Upto 30 Bar only
BONNET: Alu, Powder Coated
Leak Rate <10-3 Mbar L/S He