The on-board Video Camera feature can be used by the operator as both an alignment tool and to monitor the cutting process. Turn the crosshair "on" and capture 2, 3 or 5 points along the edge(s) of the plate to align the part program to the same angle as the plate. Turn the crosshair "off" for an unobstructed, glare-free view of the cutting process. The image is conveniently displayed on the 24" TFT color screen of the Global Control Plus.

This feature is especially useful for monitoring the process operation on machines that are very wide and/or long, allowing the operator to get a "birds-eye" view of the cutting process without leaving the operator panel. It simplifies setup, reduces cycle time and eliminates scrap, increasing cutting productivity.

  • Use to align the part program to the same angle as the plate cross-hair.
  • Simplifies setup.
  • Reduces cycle time and eliminates scrap.
  • NOTE: This camera is used when there is no Auto Plate Alignment.
  • Available on the Titan III, MPC2000, MPC2000 MC, TMC4500 DB, and SicoMat® machines.

CONTACT

Messer Cutting Systems India Private Limited


Sales & Marketing Office:

Office No. 702B, 7th Floor, 
Tanvi's Diamoda Industrial Premises Co-Op Soc. Ltd., 
Dahisar (E), Mumbai - 400 068, Maharashtra

 +91 22 4006 8395
sales.all@messer-cutting.com

Manufacturing Unit & Head Office:

No.198/2A2A, 198/2A2B and 199/2AB2, SNMV College Road, Mallumichampatti,
Coimbatore 641 050, Tamil Nadu, India.

+91 422 6725501
sales.all@messer-cutting.com