Messer Cutting Systems’ Pneumatic Punch Marker provides impact impressions into the surface of the material being marked. The reciprocating punch is extended by air pressure. Best for material 1/4" or thicker, the system is generally used for marking layout lines or hole locations. Character marking is also possible.
- Operates at a stand-off distance of 1/4", +/- 3/16", to easily accommodate plate variation.
- The high carbon steel marking pin has a diameter of .266 inches with the tip ground to 120° angle to provides a robust mark.
- The hardened ground tip is easily removed for replacement or regrinding.
- An optional capacitive height sensor is offered to automatically maintain the recommended stand-off distance. Note: The height sensing probe will react negatively to water on the plate.
